Sản phẩm chính hãng 
A powerful new design engineered with a forged, maraging-steel face significantly increases speed and distance while providing a pleasing feel and sound. All packaged in a compact, players-style model perimeter weighted to elevate forgiveness and deliver long, towering shots that hit and hold the green.
Forged, Maraging Steel Face
The strength of the variable-thickness, maraging steel allows for a thinner, more dynamic face structure with an internal sole undercut in the 17-4 stainless steel body to increase flexing to launch shots faster and higher with predictability.
Extreme Weighting
Tungsten toe and shaft tip weights combine with a tiered, dynamic face structure to expand the perimeter weighting while preserving ball speed through greater face deflection for added distance and improved accuracy.
Pleasing Sound, Feel
A polymer is precisely injected onto the inside of the face to improve feel and sound without interfering with face deflection, the source of its increased ball speed.
Micromax Grooves
A precision-milled groove pattern allows for tighter spacing and a geometry that results in an average of four extra grooves to reduce fliers in the short irons and preserve spin in the long irons for greater consistency.
Preferred Styling
The players-style blade length and offset with a modest topline create a clean, compact profile favored by discerning players. The hydropearl 2.0 finish repels water to ensure predictable, consistent performance from wet and dry conditions.
Stock Shafts
The Project X IO steel shaft is easy to load and lightweight, delivering medium trajectory and spin, a good fit for players with a moderate swing tempo. The PING Alta CB Slate graphite option delivers high launch with stability and a consistent feel.
| CLUB | LENGTH | LOFT | POWER SPEC LOFT | RETRO SPEC LOFT | LIE ANGLE | OFFSET | BOUNCE | SWINGWEIGHT |
|---|---|---|---|---|---|---|---|---|
| 3-iron | 39 1/2"1/2 | 18.0°degrees | 17.0°degrees | 20.0°degrees | 60.0°degrees | 0.19"Ping.Clubs.Specs.Offset.Units | 5.0°degrees | D0 |
| 4-iron | 38 7/8"7/8 | 21.0°degrees | 19.5°degrees | 23.0°degrees | 60.5°degrees | 0.16"Ping.Clubs.Specs.Offset.Units | 6.0°degrees | D0 |
| 5-iron | 38 1/4"1/4 | 24.0°degrees | 22.5°degrees | 26.0°degrees | 61.0°degrees | 0.13"Ping.Clubs.Specs.Offset.Units | 7.0°degrees | D0 |
| 6-iron | 37 5/8"5/8 | 27.0°degrees | 25.5°degrees | 29.0°degrees | 61.5°degrees | 0.11"Ping.Clubs.Specs.Offset.Units | 8.0°degrees | D0 |
| 7-iron | 37" | 30.5°degrees | 29.0°degrees | 32.5°degrees | 62.0°degrees | 0.08"Ping.Clubs.Specs.Offset.Units | 9.0°degrees | D0 |
| 8-iron | 36 1/2"1/2 | 35.0°degrees | 33.5°degrees | 37.0°degrees | 62.8°degrees | 0.06"Ping.Clubs.Specs.Offset.Units | 10.0°degrees | D0 |
| 9-iron | 36" | 40.0°degrees | 38.5°degrees | 42.0°degrees | 63.5°degrees | 0.04"Ping.Clubs.Specs.Offset.Units | 11.5°degrees | D0.5 |
| PW | 35 1/2"1/2 | 45.0°degrees | 44.0°degrees | 47.0°degrees | 64.1°degrees | 0.02"Ping.Clubs.Specs.Offset.Units | 13.0°degrees | D2 |
| UW | 35 1/2"1/2 | 50.0°degrees | 49.0°degrees | 52.0°degrees | 64.1°degrees | 0.02"Ping.Clubs.Specs.Offset.Units | 13.0°degrees | D2 |
NOTES
- These are design specifications that may vary due to manufacturing tolerances.
- Lie angle is based on Black Colour Code at standard length.
- Power Spec Loft is a fitting option for players looking to boost their iron distance or decrease spin to hit a desired trajectory window. The Power Spec is a custom-designed loft configuration that delivers a power boost in a calculated fashion without sacrificing the integrity of the club’s design.
- Retro Spec Loft is a fitting option if you’re less concerned with overall distance and more with precision and a higher trajectory for more stopping power. This loft configuration yields functional distance gaps for utilizing a 3-wedge setup or a more classic loft spec.
- Club bounce angles will vary slightly if ordered with non-standard loft specs.
- Standard swingweights for graphite-shafted clubs are 2 to 3 points lighter than shown, depending on shaft flex.
- Achievable swingweights depend on shaft, length and grip combinations.
- Available in left- and right-handed models.
| CLUB | LENGTH | LOFT | POWER SPEC LOFT | RETRO SPEC LOFT | LIE ANGLE | OFFSET | BOUNCE | SWINGWEIGHT |
|---|---|---|---|---|---|---|---|---|
| 3-iron | 39 1/2"1/2 | 18.0°degrees | 17.0°degrees | 20.0°degrees | 60.0°degrees | 0.19"Ping.Clubs.Specs.Offset.Units | 5.0°degrees | D0 |
| 4-iron | 38 7/8"7/8 | 21.0°degrees | 19.5°degrees | 23.0°degrees | 60.5°degrees | 0.16"Ping.Clubs.Specs.Offset.Units | 6.0°degrees | D0 |
| 5-iron | 38 1/4"1/4 | 24.0°degrees | 22.5°degrees | 26.0°degrees | 61.0°degrees | 0.13"Ping.Clubs.Specs.Offset.Units | 7.0°degrees | D0 |
| 6-iron | 37 5/8"5/8 | 27.0°degrees | 25.5°degrees | 29.0°degrees | 61.5°degrees | 0.11"Ping.Clubs.Specs.Offset.Units | 8.0°degrees | D0 |
| 7-iron | 37" | 30.5°degrees | 29.0°degrees | 32.5°degrees | 62.0°degrees | 0.08"Ping.Clubs.Specs.Offset.Units | 9.0°degrees | D0 |
| 8-iron | 36 1/2"1/2 | 35.0°degrees | 33.5°degrees | 37.0°degrees | 62.8°degrees | 0.06"Ping.Clubs.Specs.Offset.Units | 10.0°degrees | D0 |
| 9-iron | 36" | 40.0°degrees | 38.5°degrees | 42.0°degrees | 63.5°degrees | 0.04"Ping.Clubs.Specs.Offset.Units | 11.5°degrees | D0.5 |
| PW | 35 1/2"1/2 | 45.0°degrees | 44.0°degrees | 47.0°degrees | 64.1°degrees | 0.02"Ping.Clubs.Specs.Offset.Units | 13.0°degrees | D2 |
| UW | 35 1/2"1/2 | 50.0°degrees | 49.0°degrees | 52.0°degrees | 64.1°degrees | 0.02"Ping.Clubs.Specs.Offset.Units | 13.0°degrees | D2 |
NOTES
- These are design specifications that may vary due to manufacturing tolerances.
- Lie angle is based on Black Colour Code at standard length.
- Power Spec Loft is a fitting option for players looking to boost their iron distance or decrease spin to hit a desired trajectory window. The Power Spec is a custom-designed loft configuration that delivers a power boost in a calculated fashion without sacrificing the integrity of the club’s design.
- Retro Spec Loft is a fitting option if you’re less concerned with overall distance and more with precision and a higher trajectory for more stopping power. This loft configuration yields functional distance gaps for utilizing a 3-wedge setup or a more classic loft spec.
- Club bounce angles will vary slightly if ordered with non-standard loft specs.
- Standard swingweights for graphite-shafted clubs are 2 to 3 points lighter than shown, depending on shaft flex.
- Achievable swingweights depend on shaft, length and grip combinations.
- Available in left- and right-handed models.
PING AWT 2.0  | Regular | 98.0g | Mid High |
| Stiff | 104.0g | Mid | |
| X-Stiff | 119.0g | Low Mid |
